Libusb Filter Driver for MTK Port for Windows

21 Jun 2023

Libusb Filter Driver For MTK Port:

Nowadays, all Android smartphones come with USB protection. This protects the phone from being flashed or unlocked. This can be frustrating, but it can be overcome by installing a filter driver.

Download Libusb Filter Driver for MTK Port (Here)

You can install a Libusb Filter Driver for MTK Port by following these steps. Before installing, be sure to backup your device.

It is compatible with Miracle Box:

If you’re trying to remove a password, pattern, PIN, or screen lock from your MTK Android device, you will need to install and activate the LibUSB Filter Driver. This is because most MTK unlock tools such as Miracle Box, UMT, and MRT box dongles require this filter driver to work properly. If you don’t install this driver, the process will fail.

To download and install this driver, you need to click on the “Install a filter driver” button from the wizard. The installation will take 2-3 minutes to complete. After the installation, you will need to restart your computer.

This is a free driver program that will help you connect your MTK devices to the computer for flashing, unlocking, and repairing them. It is compatible with all MTK smartphones and paid GSM boxes, SN writer tools, and other MTK repair tools. So, it also supports Windows 10, 8, 7, and Vista, and works on both 32-bit and 64-bit systems.

It is compatible with UMT:

Libusb Win32 Driver is a software that can help you unlock bootloader-locked MTK smartphones. It works by disabling protections on the phone and making it usable for flashing. This is a free and open-source program that can be used on any Windows computer.

The Libusb filter driver for the MTK port helps you connect any MediaTek (MTK) CPU-based smartphone, like OPPO, Infinix, Asus, Vivo, and Xiaomi to your PC/Computer/Laptop. This is necessary to get into Meta Mode to flash the device or to unroot it. It also helps you repair IMEI and restore your device back to factory settings.

To install this driver, first, connect your MTK device to your computer or laptop via a USB data cable. Once the device is detected, click on the “Install a driver” option and select MTK USB Port from the list. Click on “Install”. The process will take a few minutes and it’ll be done. Once finished, disconnect your MTK device and restart your PC.

It is compatible with MRT Box:

LibUSB is an open-source library that provides standard access to USB devices. It is supported by a variety of operating systems, including Windows, Linux, and Android. So, it also supports all available versions of the USB protocol, ranging from the lowest to the latest. It is free and simple to use. To install the LibUSB driver, click on the link below and follow the steps to download it on your computer.

To install the LibUSB filter driver, you must first connect your MTK device to your PC and enable USB debugging mode. This is done by pressing and holding the volume up and down buttons simultaneously. After this, you can start the installation process. The setup wizard will then appear on your screen. Select the “Install device filter” option and wait for a few minutes to finish the installation. Once the process is complete, you can reconnect your device and begin using it. It is recommended that you back up your data before installing the driver.

It is compatible with SP Flash Tool:

If you want to bypass the lock of your Infinix phone, you need to install a new USB driver. This is possible if you have the LibUSB Win32 Driver installed on your computer. It is compatible with all flashing tools, including the SP Flash Tool. However, it’s important to remember that you must first back up your device before trying this method.

Previously, MediaTek devices used to have an EDL mode that allowed service center employees to force-flash firmware on bricked devices. However, the OEM recently blocked this mode.

The good news is that there are ways to bypass this restriction and flash your device. The best way to do this is to install a new driver called LibUSB. This driver will allow you to bypass the SLA and DAA Authentication of your MTK smartphone. It also makes a secure connection between your MTK device and Miracle Box, UMT, MRT, or CM2 Dongle Box. The driver is available for Windows XP (32 and 64bit), Windows 7, and 8. It is compatible with both 32- and 64-bit versions of Linux as well.


Leave a reply