C-Media USB Audio Class 1.0 And 2.0 DAC Device Driver Free Download

01 Nov 2017
c-media-usb-audio-class-10-and-20-dac

C-Media USB Audio Class 1.0 And 2.0 DAC Device Driver Free Download:

Upgrade your system sound media with the top-rated c-media USB audio class 1.0 and 2.0 DAC device driver. Download and install it to manage different compatibility issues, improve overall performance, resolve various errors spotted throughout product usage, etc.

IHVs should provide jack information via the KSPROPERTY_JACK_DESCRIPTION structure. The MIN and MAX fields must be an integer multiple of the step size defined in the RES field.

Download the C-Media USB Audio Class 1.0 And 2.0 DAC Device Driver (Here)

:

Drivers Update Tool:

Using an easy-to-use program such as Drivers Update Tool can help you solve the problem with your C-Media USB Audio Class 1.0 And 2.0 DAC Device driver. The tool can detect the right driver for your system and automatically download and install it. Once the drivers are installed, your sound quality will be upgraded. This software is also protected from viruses and malware.

The HS-100C is a fully integrated, crystal-free USB audio single-chip solution optimized typically for USB headsets, headphones, and dongle (wireless adapter enabled) applications. It is equipped with all necessary analogue and digital modules, including stereo DAC and earphone driver; mono ADC; microphone pre-amp booster; PLL; regulator; and USB transceiver. Many features of the HS-100C are programmable with jumper pins or external EEPROM. For example, customers can customize unique USB VID/PID / Product String / Manufacture String and Max / Min / Initial volume settings via external EEPROM.

To use the HS-100C, you will need a compatible USB host controller and an appropriate USB cable or dongle. The HS-100C requires at least 500mA of power, which can be supplied by a powered USB hub or for portable usage a type of Y cable connected to a power bank. You can configure the HS-100C to run in USB Audio Class 1.0 or USB Audio Class 2.0 mode. During startup, one of the digital input source LEDs will illuminate to indicate the current USB setting: Digital 1 represents USB Audio Class 1.0 and Digital 2 represents USB Audio Class 2.0.

Installation Guide:

This driver allows Windows to control the device in USB Audio Class 1.0 and 2.0 mode, providing low latency. It supports mono, stereo and multi-channel streams at up to 16-, 24- and 32-bit resolution. It also supports asynchronous and synchronous endpoints, as well as the adaptive clocking model. The driver can be used with several sound APIs, including WASAPI, DirectSound and MME. In addition, the driver is compatible with XMOS devices.

The driver is independent of the specific silicon and firmware solution used in a particular USB product. It works as long as the underlying hardware implements the required USB Audio 2.0 descriptors and endpoints and can be controlled by the appropriate command sets. The driver implements an ASIO 2.3.1-compliant software interface and integrates with Windows as a standard WDM driver.

The DAC’s front panel 2X or 4X light will flash once when the DAC is switched to USB AUDIO 2.0 MODE. This mode is retained in the DAC’s non-volatile memory and can be changed at any time by pressing and holding both INPUT buttons for 10 seconds. The DAC must be in USB AUDIO 2.0 mode when playing DSD and high sample rate PCM.

The free evaluation version of the TUSBAudio driver is available for download from the eXtream Software Development website. It has all the features of the paid license, but it is restricted to use with an XMOS product and introduces a beep tone every 5 minutes into the output. In addition, the evaluation version can only be installed once. If you encounter a problem with the driver, you can collect system event logs as described in Matthew van Eerde’s article, Collecting Audio Device Driver Events. This information can help the Xtream Software Development team identify and address the issue quickly.

Free Download to Drivers:

C-Media USB Audio Class 1.0 And 2.0 DAC Device Driver is a software program which makes it possible for Windows systems. To identify the sound card component and make use of its basic functions. It also makes the characteristics of this particular sound card (like model, manufacturer. And number of channels) completely accessible to computers. So that the system can fully benefit from the capabilities of this specific audio hardware.

C Media USB Audio Class 1.0 And 2.0 DAC Driver Free Download is an open-source driver that implements the XMOS audio firmware. And allows OEMs and IHVs to integrate their own proprietary USB Audio solutions into Windows. Without having to modify or write a new kernel mode driver. The driver supports a range of standard USB Audio APIs, such as WASAPI. DirectSound, and MME, and it exposes standard Windows MIDI ports when supported by the hardware device. The driver is designed to meet the high-performance requirements of professional audio applications. It is optimized for low latency and a low CPU load.

The HS-100C is an all-in-one USB single-chip solution. With all necessary analogue and digital modules embedded. Stereo DAC and earphone drivers; mono ADC. Microphone pre-amp booster; PLL regulator and USB transceiver. The HS-100C supports USB Audio Class 2.0 and 1.0, and most features are programmable using jumper pins or external EEPROM. Customers can customize the unique USB VID/PID, product string, and Max / Min / Initial volume settings via external EEPROM.

RELATED POST

Leave a reply